| |
 Staun® Intrenal BeadLock STNSBLN1679
No more popped beads, DOT or balance worries. Staun beadlocks securely lock both beads to the rim by dividing the tire's air chamber into two parts. Through a separate valve stem, the bead lock is inflated to 50 psi. Ever had a tire bead problem at 50 psi? Through a second valve stem, you can literally set your tires to any pressure you want. And even when the tire goes completely flat, you still have what we call a "limp flat" capability. The bead lock is a cushion between road and rim allowing you to drive back to camp or a more convenient spot to change the tire.
Get yours for AED 640 |
|
| |
Staun® Intrenal BeadLock STNSBLN1779
No more popped beads, DOT or balance worries. Staun beadlocks securely lock both beads to the rim by dividing the tire's air chamber into two parts. Through a separate valve stem, the bead lock is inflated to 50 psi. Ever had a tire bead problem at 50 psi? Through a second valve stem, you can literally set your tires to any pressure you want. And even when the tire goes completely flat, you still have what we call a "limp flat" capability. The bead lock is a cushion between road and rim allowing you to drive back to camp or a more convenient spot to change the tire.
Get yours for AED 670 |
|
| |
 Luxi® 4-Way Valve Cores Tool
Acme 4 Way Tire Valve Repair Tool. Inserts and removes valve cores. Retapes inside valve threads. Reconditions outside valve threads. EAsy to use. This Acme 4 Way Tire Valve is one of many top quality items in our Tire Repair Kits department.
Get yours for AED 15 |
|
| |
 CB® Tyre Deflation Valve
A lightweight valve incorporating a number of selectable deflation pressure settings. To operate, the valve is screwed onto the existing tyre valve; the tyre deflates to the required pressure and the valve then shuts off once the pressure is achieved. The deflation valve is removed and stowed in one of the several stowage racks or boxes available.
Get yours for AED 380 |
|
| |
 FG® Tyre Pressure Gauge
Fast, clear, accurate pressure readings means that Tyrecheck is the professionals choice.—Dial gauge, accurate and easy to read
cChoice of 2 sizes - 63mm and 80mm diameter dial
—Choice of single clip-on or twin hold-on tyre valve connectors
—Low Pressure Model (DPG6) available
—Integral swivel fitting on twin hold-on, for ease of use
—Surrounded in rubber for impact absorption
Get yours for AED 35 |
|
| |
 BushRanger® Pro-Air Compressor # 55x02
Specifications: —Maximum Air Flow: 55 litres per minute, Maximum Voltage: 13.8 volt, —Maximum Amperage Draw: 23 A, —Maximum Working Pressure: 150 PSI, —Maximum Restart Pressure: 200 PSI, —Maximum Ambient Temp.: 60°C, —Minimum Ambient Temp.: -40°C, —Continuous use: 40 mins @ 30 psi @ 22°C
Get yours for AED 530 |
|
| |
 BushRanger® Black MAX Air Compressor # 55x12
Specifications:
—Maximum Air Flow: 66 litres per minute
—Maximum Voltage: 13.8 volt
—Maximum Amperage Draw: 27 A
—Maximum Working Pressure: 150 PSI
—Maximum Restart Pressure: 200 PSI
—Maximum Ambient Temp.: 70°C
—Minimum Ambient Temp.: -40°C
—Maximum duty cycle time: 33% @ 100psi
Get yours for AED 710 |
|
| |
 ViAir® Portable Air Compressor # 400P
Specifications:
—Maximum Air Flow: 66 litres per minute
—Maximum Voltage: 13.8 volt
—Maximum Amperage Draw: 27 A
—Maximum Working Pressure: 150 PSI
—Maximum Restart Pressure: 200 PSI
—Maximum Ambient Temp.: 70°C
—Minimum Ambient Temp.: -40°C
—Maximum duty cycle time: 33% @ 100psi
Get yours for AED 590 |
|
| |
 Bullet Valve Stem Caps in Brass Finish
Dress up your vehicle with our Bullet Style Tire Valve Stem Caps. These valve stem caps are made from actual 9MM bullet cartridges that have been fired. We offer these in both brass and nickel plated. The shells screw onto your tire valve stem. These will fit any standard valve from car, truck, and motorcycle tires to American bicycle tires. These caps even contain a rubber seal inside to protect against moisture. Sold in packs of 5. AED 55 |
|
| |
 Tomken™ Tomken Oversize Spare Tire Relocator for Jeep YJ, TJ, LJ
Now that you have those big tires you're going to need a big spare. Just one problem, it won't fit on your stock tire carrier. Now it will with Tomken's Spare Tire Re-locator.. AED 250 |
|
| |
 No-Loss™ Tire Valve Cap
Imagine never losing a valve cap while airing up or down on your off-roading adventures. These caps are built for NATO military vehicles. Seems they want a valve cap that can hold tire pressures even if the valve core fails. Not a bad idea. The No Loss cap is all brass with a knurled outer surface. Brass will not stick to your brass valve stem threads like those cheap aluminum caps. Road salts, road chemicals and moisture can set up electrolysis and actually fuse the aluminum caps to the brass valve stem threads. Can't check your pressures if you can't get the valve cap off, can we? Inside the No Loss cap is a quality 0-ring for a positive air tight seal. Guaranteed not to leak even if the valve core is missing. Great for off-roaders that are airing up and airing down huge tires numerous times per day..
AED 55 |
|
| |
 Staun™ Tire Deflator
Staun tire deflators are the easiest, most accurate way of decreasing your vehicle's tire pressure. They are the most superior high quality, fully guaranteed deflators available on the market.. AED 250 |
|
| |
 Olympic 4X4 Extended Heavy Duty Tire Carrier for 76-06 Jeep CJ, Wrangler YJ, TJ, Unlimited & Cherokee XJ
New Extended Heavy Duty Tire Mount replaces original tire mount on wranglers tailgate. Extends spare tire beyond bumper so you can fit 32" and larger spare tires with original or after market bumpers. Manufactured out of heavy duty 1/4" thick solid steel plate, providing the extra strength to handle up to a 37" spare tire. Engineered with pre-drilled mounting holes for either 4-1/2' or 5-1/2' on wheel centers to fit all Wranglers and CJs wheel patterns. Lug bolts are included that easily press into position when tightened with lug wrench. AED 390 |
|
