Front Runner Jeep Gladiator JT (2019-Current) Extreme Roof Rack Kit
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep Gladiator JT including the Slimline II Tray (1425mm x 1560mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
The Jeep Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
Note: This kit is not suitable for the Mojave Edition and Diesel models of the Jeep Gladiator. Snorkels are not compatible with the Front Bar Roof Rack Mount in this kit.
KRJG005T – Jeep Gladiator JT (2019-Current) Extreme Roof Rack Kit – by Front Runner
- FAJL004 – Jeep Wrangler JL (2018-Current) Front Bar Roof Rack Mount – by Front Runner
- FAJT001 – Jeep Gladiator JT (2019-Current) Foot Rails – by Front Runner
- FAJT002 – Jeep Gladiator (2019-Current) Inner Brackets – by Front Runner
- RRSTJ08 – Slimline II Tray – 1425mm(W) X 1560mm(L) – by Front Runner
- WDST006 – Wind Deflector 45mm Lip Wide Pair / 1345mm(W) – by Front Runner
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicleâ€™s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Legs to determine the height of the rack from your vehicleâ€™s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 520mm (20″)
Length 1615mm (64″)
Height 450mm (18″)
Weight 41.0kg (90.1lbs)
Find out more about Front Runner here
Travel. Dream. Design. Build. Test. Evolve. Repeat.
Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”
And just like that, before the moon gave way to the sun, we were born.
With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.
Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.
Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.